The UTILITY Window
3-162 AWG610 Arbitrary Waveform Generator User Manual
Table3-44: Available FTP commands (cont.)
Commands Descriptions
put xxxx [remoteĆfile] Transfers the file xxxx in your local computer and stores it in
the instrument file. The same xxxx name is used for a
instrument file if the remote file is not specified.
pwd Print the path to the current directory in the instrument
quit Terminates the ftp session and exits the ftp.
. The ftp server in the AWG610 Arbitrary Waveform Generator does not
support mget commands, or meta characters. For example, when you use the put
command with meta character as follows:
put ABS.WFM *.*
a file named *.* may be created in the internal disk of the AWG610 Arbitrary
Waveform Generator.
This *.* file is not displayed on the AWG610 Arbitrary Waveform Generator file
list. Access to a file created in this manner is not possible through the front
panel. Use GPIB commands to access such files.
In some FTP client software, you may not be able to use these commands.
HardcopyThe image on the screen can be output to a file. Use a hardcopy file to make
reports with a desktop publishing (DTP) application software running on PC, or
output those files to a printer using a PC. You cannot connect a printer directly to
the instrument.
Initiate hardcopy function by pushing the HARDCOPY button on the front-panel
or entering the GPIB command. You can select either TIFF or BMP for the file
formats. Select the hard disk, floppy disk, or a remote computer file system for
the file output destination. The file size is approximately 150 Kbytes, indepen-
dent of the format.
Specify the hardcopy format and the output destination you needed before
running a hardcopy.
1. Push UTILITY (front-panel)System (bottom) to display the hardcopy
setup screen. See Figure 3–53.