Quick Editing
AWG610 Arbitrary Waveform Generator User Manual 3-97
Renewing Edit Buffer
During execution of Quick Edit, you can combine the four VERTICAL and
HORIZONTAL knobs and the general purpose knob for the operation purpose.
Each time you operate any of the knobs, the following internal calculation is
made to renew the waveform data:
The cursor-to-cursor data is defined as the object of calculation with respect
to the waveform that was obtained when you start Quick Edit.
Using the current Vertical Scale, Vertical Offset, Horizontal Scale, and
Horizontal Offset values, the calculation is made in this order with respect to
the cursor-to-cursor data.
Smoothing is executed.
About Undo
The undo buffer is used for waveform backup, so the Quick Editor does not
support the Undo! function. Before exiting Undo!, you are asking whether to
reflect the changes to the waveform. To cancel the changes, select No.