Command Descriptions
3-182 AWG610 Arbitrary Waveform Generator User Manual
”output_filename” is the complete file name (file name and extension) to contain
the resultant convolution waveform. The argument can include a relative or
absolute path name. Enclose the file name within double quotation marks.
”filename1” and ”filename2” are the complete (file name and extension) names
of the files on which you are performing the convolution. Both files must be on
the active drive. The argument can include a relative or absolute path name.
Enclose each file name within double quotation marks.
”newsine.wfm” = conv(”sine.wfm”, ”sine2x.wfm”)
Copy( )The copy() statement copies the specified file name to a new file name and/or
location on the current drive.
Waveform
copy(”source_file”, ”target_file”)
”source_file” is the complete file name (path, file name and extension) to the file
that you want to copy. The file must be located on the active drive. The argument
can include a relative or absolute path name. Enclose the file name within double
quotation marks.
”target_file” is the complete file name (path, file name and extension) to the
location to which you are copying the source file. The target file must be located
on the active drive. The argument can include a relative or absolute path name.
Enclose the file name within double quotation marks.
copy(”sine.wfm”, ”/test_dir/sine2.wfm”)
Corr( )The corr() statement executes correlation between the waveform data of two
specified files. All marker values in the output file are set to 0. There are no
restrictions on the data lengths of the two waveforms. For markers, the value of
the first point is 1, and those of all the others are 0. Refer to Correlation on page
F–5 for more information.
Waveform
Arguments
Example
Group
Syntax
Arguments
Example
Group