AWG610 Arbitrary Waveform Generator User Manual 3-91
Quick Editing
Quick edit allows you to modify and output the currently edited waveform (with
the waveform editor) in real time by using the knobs on the front-panel. The
Quick Edit enables you to scale or shift the cursor-to-cursor data on the
Waveform editor screen along the vertical and/or horizontal axis. Use the
vertical scale, vertical offset, horizontal scale, and horizontal offset front-panel
knobs.
If Update Mode is set to Auto with the waveform editor, waveform modifica-
tions using the knobs are automatically updated to the waveform file and to the
output waveform.
. You can enter into the quick edit mode only from the waveform editor.

Screen Display

Open a target waveform with the waveform editor, and then push the QUICK
EDIT button on the front-panel. The screen is the same as that of the waveform
editor in graphic mode except for the bottom and side buttons. A bottom button
is not available, and only three side buttons can be used for adjusting the editing
parameters. See Figure 3–20 for an example of the quick edit screen.