Tektronix AWG610 2-6 AWG610 Arbitrary Waveform Generator User Manual, Figure 2-4: Rear panel signal and powerconnectors

Operating Basics
2-6 AWG610 Arbitrary Waveform Generator User Manual
Power supply fuse holder
The10 A fast blow and5A(T)
fuseare used for 115 V and
230V systems, respectively
Power connector
Connectthe provided power cable to this
connector.
10BASEĆT connector IEEE STD 488 connector
Connectto the Ethernet
network.
KEYBOARD
connector
DISPLAYMONITOR OUT
connector
Inputsexternal event signals. This
signalcan be used for sequence
controlin Enhanced mode
PRINCIPALPOWER SWITCH
Appliespower to the standby circuit. In
additionto this switch being on, the front
panelON/STBY switch must also be
turnedon.
EVENT IN connector
1/4 CLOCK OUT connector
Theinternal 10 MHz clock reference signal is output when the
internalclock reference is selected. The external clock reference
signalis output when the external clock reference is selected.
Themaximum output level is 1 VpĆp0.1V into 50 Wload
1/4Sampling clock signal output. 10 MHz REF OUT connector
TRIG IN connector
Externaltrigger signal
input.
10 MHz REF IN connector
External10 MHz reference
clocksignal input.
AGPIB connector for remote
computercontrol through an
IEEE488 standard parallel interface.
Connectto an external monitor.
Connectto a standard PC
101Ćkeykeyboard.
Figure 2-4: Rear panel signal and powerconnectors