Tutorials
AWG610 Arbitrary Waveform Generator User Manual 2-57
4. Confirm that the knob icon is located to the right of the Type field items.
This is the default selection for this dialog box. If Type is not selected, use
the y or b button on the front panel to select the Type field.
5. Turn the general purpose knob to highlight the Sine field item.
Note that Sine is the default selection.
6. Push the b button twice to select the Cycle field.
7. Turn the general purpose knob to set the cycle to 5.0.
8. Push the Enter button to enter the value in the field.
9. Push the OK side button.
You have created a five-cycle sine wave with a peak-to-peak range of 2.0 digital
to analog converter (DAC) units, as shown in Figure 2–37.
Figure 2-37: Standard sine wave functioncreated in the Waveform Editor