Tektronix AWG610 Create a Sine Wave

Tutorials
AWG610 Arbitrary Waveform Generator User Manual 2-55
Figure 2-35: Waveformeditor initial screen
Do the following steps to create a standard sine function waveform:
1. Push the Operation bottom button.
The instrument displays the Operation pop-up menu.
2. Select Standard Waveform... from the pop-up menu by using the general
purpose knob.
By default, Standard Waveform... is selected.
3. Push the OK side button.
The instrument displays the standard function dialog box as shown in
Figure 2–36.
Create a Sine Wave