Tektronix AWG610 Save Changes

Tutorials
AWG610 Arbitrary Waveform Generator User Manual 2-65
If you connected an oscilloscope to the AWG610 Arbitrary Waveform Generator,
observe that the waveform on the oscilloscope changes as soon as you make
changes to the Quick Editor window.
The waveform in the edit buffer is copied into the Undo buffer before going into
the Quick edit mode. Quick editing is performed on the waveform data in the
edit buffer. When you quit the Quick Editor, you can save the changes or cancel
the changes.
When you save the changes, the instrument does not take any action, as the
waveform data is already current. When you select cancel the changes, the
instrument copies the contents of the Undo buffer back to the edit buffer.
Do the following steps to save the Quick Edit mode changes you just made:
1. Push the QUICK EDIT button on the front panel to quit the quick editor.
A message box appears at the center of the screen and the side menu
displays Cancel, No, and Yes menu items.
2. Push the Yes side button to save the changes.
If you have connected an oscilloscope to the AWG610 Arbitrary Waveform
Generator, the waveform being displayed on the oscilloscope screen shows
the new waveform.
Remember that the waveform in the Quick Editor does not affect the waveform
in the waveform memory unless you save it to the file.
You have completed the Editing a Waveform Using Quick Editor tutorial.
Save Changes