Tutorials
2-76 AWG610 Arbitrary Waveform Generator User Manual
2. Fill in the CH1 and Repeat Count columns for lines 1 through 4 according to
Table 2–19.
Refer to steps 1 through 12 beginning on page 2–73 of this tutorial if you
need help. To set Inf. in the Repeat Count of line 2, push the Infinity
(SHIFT +) side button once.
3. Repeatedly push the y button to go back to the line 1.
4. Push the CLEAR MENU bottom button.
This step must be made to make the a and ' buttons available to move the
highlighted cursor.
5. Push the ' button to move the highlighted cursor to the Wait Trigger
column.
6. Push the Data Entry bottom button.
7. Push the Wait Trig. side button to set this field to On.
8. Push the Jump Mode bottom button.
The screen as shown in Figure 2–46 appears.
Figure 2-46: Screen for setting jumpmode
9. Push the Logic side button to set the jump mode to Logic Jump.