The Graphical Waveform Editor
3-50 AWG610 Arbitrary Waveform Generator User Manual
The Operation MenuThe Operation bottom button provides waveform data edit commands. The
following sections describe each edit command in detail.
If you select a command with an ellipsis (...), the instrument displays either a
side menu or dialog box that lets you set additional parameters. Commands that
do not have ellipses are executed immediately.
This command creates standard waveforms such as sine and triangle waves in the
edit area. The edit area is the area between the cursor positions. Do the following
steps to create a standard waveform:
1. Move the cursors to specify the edit area where the function waveform will
be created.
2. Push Operation (bottom)Standard Waveform... (pop-up).
The Set Standard Function dialog box as shown in Figure 3–5 is displayed.
Table 3–10 describes the dialog box field functions.
3. Set the required parameters and the push the OK side button.
The instrument replaces, inserts, adds, or multiplies the edit area with the
specified standard waveform data.
Figure 3-5: Standard Function Waveformdialog box