The Sequence Editor
AWG610 Arbitrary Waveform Generator User Manual 3-113
. Infinity setting in Repeat Count and all settings in Wait Trigger, Goto One
and Logic Jump are neglected in the subsequence.
Table3-34: Sequence editor bottom menu
Button Description
File Provides sideĆmenucommands for closing the editor, saving the
sequence table to the current file name, and saving the sequence data
to a new file name.
Data Entry Provides sideĆmenu commands for inserting a new line in the table as
well as entering and editing data in the sequence table columns.
Line Edit ProvidessideĆmenu commands to cut, copy, and paste table lines.
Jump Mode Provides sideĆmenu commands to select jump mode.
Event Jump Provides sideĆmenu commands and a new screen for entering event
jumps into the sequence table.
Move Cursor To Provides a popĆup dialog box to specify table line number to select for
editing.
Sequence Table Editing This section describes the sequence table edit operations.
Sequence table editing is based on selecting a cell in the table and editing or
setting parameters in that cell.
The cursor moves on a cell-by-cell basis. The following text describes how to
move the cursor. The instrument highlights the active cell.
HMove the cursor up or down a line by using the general purpose knob, the y
and b buttons, or the keyboard keys.
HMove the cursor horizontally along a line by using the a and ' buttons or the
keyboard keys.
HYou can also move the cursor by entering numeric values. This is conve-
nient, for example, when a long sequence results, because more rapid cursor
movement is implemented.
Push the Move Cursor to bottom button to display the Move Cursor to the
dialog box. Input the destination line number in the dialog box, and then
push the OK side button.