Operating Basics
2-4 AWG610 Arbitrary Waveform Generator User Manual

TRIGGER controls

QUICK EDIT button

RUN button

VERTICAL controls HORIZONTAL controls

Entersthe QUICK EDIT mode from the waveform editor. This button
allowsyou to edit waveforms that have immediate effect on the output
signal.Use together with the VERTICAL and HORIZONTAL controls for
quickedit.
Usedto control the output vertical axis parameters.
Pushingthe VERTICAL MENU button displays the VERTICAL side menu.
Thisis the same as selecting SETUP (front)Vertical (bottom).
TheOFFSET knob, adjusts the vertical offset.
TheLEVEL/SCALE knob adjusts the amplitude.

FORCE EVENT button

Controlsthe trigger parameters.
Pushingthe TRIGGER MENU button
displaysthe Trigger side menu. This
hasthe same effect as pushing
SETUP(front)Trigger (bottom).
TheLEVEL knob adjusts the trigger
level.

FORCE TRIGGER button

Pushingthe FORCE TRIGGER button
generatesan internal trigger event.
Pushingthe FORCE EVENT button generates an
internalevent signal.
Usedto control the output horizontal axis parameters.
Pushingthe HORIZONTAL MENU button displays the Horizontal side menu.
Thisis the same as selecting SETUP (front)Horizontal (bottom).
TheOFFSET knob adjusts the horizontal position.
TheSAMPLE RATE/SCALE knob adjusts the clock frequency.
Enableswaveform output. The signal
outputdepends on the RUN mode
settings.
Figure 2-3: Front panel trigger and output controls