Tektronix AWG610 Set Run Mode

Tutorials
2-78 AWG610 Arbitrary Waveform Generator User Manual
20. Push the Data Entry bottom button.
This step must be made to go back to the sequence table screen.
21. Push the Goto One side button to On.
You should be able to complete the main sequence table by using steps similar to
creating the subsequence table. The finished main sequence table should look
like Figure 2–48.
Figure 2-48: Example of sequence (MAINSEQ.SEQ)
22. Save the sequence table in the file mainseq.seq. Refer to Save the Sequence
on page 2–75.
The event jump functions in the sequence list are only functional when the
instrument run mode is set to Enhanced mode. Do the following steps to set the
run mode to enhanced:
1. Push the SETUP button on the front-panel to display the SETUP screen.
2. Push the Run Mode bottom button.
3. Push the Enhanced side button.
Set Run Mode