AWG610 Arbitrary Waveform Generator User Manual 2-47
Tutorials
This section contains tutorials to help you learn how to operate the
AWG610 Arbitrary Waveform Generator. These tutorials provide a good
introduction to the following basic features of the instrument:
Setting up the instrument
Loading and outputting a sample waveform
Creating and editing standard function waveforms
Editing a waveform using quick editor
Using the equation editor
Creating and executing sequences
. These tutorials do not cover all the features and functions of the AWG610
Arbitrary Waveform Generator. They are intended only to introduce the basic
instrument functions.
By connecting an oscilloscope to the AWG610 Arbitrary Waveform Generator
and observing the waveforms output, you will understand how the AWG610
Arbitrary Waveform Generator works. The following equipment and accessories
are needed:
A digital storage oscilloscope
(A Tektronix TDS-Series oscilloscope or equivalent)
One 50 W SMA cable
One 50 W SMA terminator
One SMA (Fe)-BNC (Ma) adapter
Connect the digital storage oscilloscope to the AWG610 Arbitrary Waveform
Generator as shown in Figure 2–30.
. The CH1 LED is off when a signal is being output from CH1.
If the CH1 LED is on, turn off the output by pushing the CH1 OUT button.