Telex ISP-100 manual System Configurations see Figure

7-4

there is when changing between QuickSETs or using a GPI mute. The total time for ramp-up and ramp-down is twice the time specified. (i.e. If 50 ms of time is specified, the ramp-down will be 50 ms and the ramp-up will be 50 ms. Thus, the total time between the start of the ramp-down to the end of the ramp-up is 100 ms.)

Display recently opened files in the File Menu

The check box turns on and off the Most Recently Used files (MRU) function. Removing the check mark will disable the function and clear the list.

Open Device Status panel on error

When a device status message is received, the status panel is automatically opened.

Display QuickMAP pop-up names

If selected the pop-up component nametags in the QuickMAP layout display are shown.

Display Filter Bandwidth in “Q”

If the box is checked filter bandwidth to be displayed in terms of Q. If it is unchecked bandwidth will be displayed in terms of octave fraction.

System Configurations (see Figure 7-8)

Figure 7-8System configuration dialog.

New Projects

This is the directory under which new projects are stored. To modify the path, click on the Modify... button located to the right of the directory path entry.

Component Library

This is the directory under which the component presets are stored. To modify the path, click on the Modify... button located to the right of the directory path entry.

10 July 1998