Telex manual Updating the ISP-100’s Operating System, 1OS mismatch dialog

5-2

Updating the ISP-100’s Operating System

Figure 5-1OS mismatch dialog.

Figure 5-2OS download request dialog.

The updating of the operating system contained in the ISP-100’s flash memory is usually required after loading a new version of VUE-IT on the computer. A dialog box such as those in Figures 5-1 and 5-2 usually indicates this.

The procedure is as follows:

1.Make sure both the computer and the ISP-100 are both turned off.

2.Connect the computer to the ISP-100.

3.Hold in the default switch located to the left of the power switch and turn on the ISP-100. Continue to hold in the default switch until the LEDs turn red and begin rotating. See Figure 2-1 item 6.

4.Turn on the computer and start the VUE-IT software. You should see a dialog box similar to that in Figure 5-2.

10 July 1998