Telex ISP-100 manual Project Properties, QuickMAP Selection

7-7

Project Properties

A QuickMAP is a signal processing topology used with an ISP-100. The QuickMAP sets the signal paths and processing from input to output. An ISP-100 can hold one QuickMAP at a time.

Figure 7-11Project properties dialog.

Project properties (see Figure 7-11) provides the user with information on the name of the project, project location, and notes related to the project. It is accessed by double clicking on the project name entry, or by clicking on the project name entry and then clicking on the Properties button in the Project Manager.

QuickMAP Selection

Figure 7-12QuickMAP selection dialog.

QuickMAP Selection (see Figure 7-12) is where a project’s QuickMAP is chosen. It appears when the Build From Script option is selected when setting up a new project. Here you will be able to select the script that will be used to create the QuickMAP. The QuickMAPs can be sorted by Name, I/O Configuration, Creation Time, and Modification Time. To sort the QuickMAPs, click on the heading button of the property you wish to sort by (i.e. Name, I/O

Using VUE-IT