MOM-1 Analog Output Module | Telex ISP-100 guide

4-7

MOM-1 Analog Output Module

Power

Symbol	Description	Minimum	Typical	Maximum	Units
VA18P	positive analog supply voltage	17.50	18.00	20.00	volts
VA18M	negative analog supply voltage	-17.50	-18.00	-20.00	volts
VD5P	positive digital supply voltage	4.75	5.00	5.50	volts
IA18P	positive analog supply current	92	96	100	milliamps
IA18M	negative analog supply current	47	51	55	milliamps
ID5P	positive digital supply current	114	124	134	milliamps

Performance

Symbol	Description	Minimum	Typical	Maximum	Units
THD+N	Total Harmonic Distortion + Noise		0.003	0.007	%
IMD	Intermodulation Distortion1		0.004	0.007	%
DIM	Dynamic Intermodulation Distortion2		0.003	0.006	%
	Noise Floor		110	107	dBu
	Channel Crosstalk		-100	-80	dB
N	Resolution		20		bits
	Frequency Response		+0.1, - 0.5	+.2, -1.0	dB
	Delay3	25			WST
MCLK+	Master Clock	12.283	12.288	12.292	MHz
WST+	Word Clock	47.98	48.000	48.02	kHz
	Oversampling		128X
	Stopband Attenuation	75			dB
	Maximum Output Level4	21	26		dBu
	Interchannel Phase Deviation		0.5	1.0	degrees
	Output Balance		0.5		dB
	Gain Accuracy5		±0.05	±0.25	dB
Z	Output Impedance6	594	600	606	ohms
out	Operating Temperature	50	75	100	°F
	Operating Temperature	50	75	100	°F
	Operating Humidity	20	50	80	%

Miscellaneous

Overall Size:	8.40” long by 2.55” wide by 1.50” high
Weight:	4.3 ounces
Input connector:	3 Pin standard male XLR
Mating connector:	3 Pin standard female XLR
Internal connector:	48 pin standard female “F” size per DIN 41 612
XLR pinout:	Pin 1 – shield, Pin 2 – positive signal, Pin 3 – negative signal
De-emphasis:	48 kHz de-emphasis, selectable via SPI control I/F.
Relay mute:	Left and right output relay mute, selectable via SPI control I/F.
DAC mute:	Left and right individually or group selectable via SPI control I/F.
Serial Data Interface:	7 formats available, selectable via SPI control I/F.
Analog Gain:	Selectable: 0, -8, -6, -4, 8 dB via SPI control I/F.7

Notes

1Unity gain, SMPTE 4:1, 60 Hz & 7 kHz sine waves.

2Unity gain, DIM30 4:1, 3.15 kHz SQ wave & 15 kHz sine wave, 30 kHz LPF.

3 Group Delay inherent in conversion process. WST=1/48 kHz

4 Minimum levels are single ended, maximum levels are differential and balanced. Bridging load. 5 Relative to unity gain, 1 kHz.

6 Electronically balanced, RF surpressed, differential impedance 20- 20kHz.

Specifications

Image 39

Telex ISP-100 manual MOM-1 Analog Output Module

Contents

ISP-100 This page Left Blank Intentionally Proprietary Notice Shipping to Manufacturer for Repair or Adjustment Procedure for Returns Iii Table of Contents PEQ Installing VUE-IT Processing Components Viii Table of Contents Glossary Standard Quickmap Library An Overview of the ISP-100 About this Manual Customer SupportConventions Used in this Manual Front Panel Features see Figure IntroductionUnpacking Rack Mounting Rear Panel Features see FigurePower Requirements Operating Environment Battery/module tool Card Installation Procedure Balanced Input from Unbalanced Output Cable DiagramsAnalog Audio MIM-1, MIM-2, MOM-1 Balanced Input from Balanced Output Spdif Input Balanced Output to Unbalanced InputDigital Audio MDM-1 Cards AES/EBU Input Front Panel RS-232 AES/EBU OutputSpdif Output Serial Communications Connections Over 50 Feet Rear Panel RS-232 16Connector pinouts July Master Sync Input General Purpose Inputs GPI This page Left Blank Intentionally User Modifications Case of Problems Factory Default Mode Diagnostics Retrieving Serial Numbers Retrieving Version Numbers Changing the Battery Changing the FuseSchurter P/N Telex P/N Finland Denmark Helpful Information Technical Support Shipping to Manufacturer for Repair or Adjustment This page Left Blank Intentionally Components HighPass Filter Property Limiter PropertyFilters Property LowPass Filter Property Output Property ISP-100 Component PlotsCombine Property Input Property Peaked HighPass Filter Gate Linkwitz-Riley 3-way Crossover Notch Filter System Frequency Response System Noise Floor System THD+N System Measurements Miscellaneous PowerMIM-1 & MIM-2* Analog Input Modules Performance MOM-1 Analog Output Module Performance Sample Rate Converter Engaged1 MDM-1 AES/EBU Digital I/O Module Mutes Performance Sample Rate Converter bypassed Physical Power Minimum System Requirements Identifying a Serial PortLoading the Software 1OS mismatch dialog Updating the ISP-100’s Operating System 3Open OS file dialog Dialog box similar to the one in the -6 should appear Configuring the Software 9Communications error dialog This page Left Blank Intentionally 1VUE-IT workspace Starting VUE-IT 2Create new project dialog Starting a New Project 4New project created VUE-IT File System Component Directory Archiving ProjectsMounting Projects QuickMAP Template Files Using VUE-IT Edit see Figure Soft Mute Ramp in Ms Window see Figure System Configurations see Figure Project Manager Properties for the ISP-100 Master Clock SelectionInput Slot Bit Level QuickMAP Selection Project Properties Component Properties QuickMAP Properties 15Component export dialog Component Export Component Import QuickSET Manager Selecting the Active QuickSET Configuring Input PinsCreating New QuickSETs Deleting QuickSETs 19 GPI panel Testing the GPI Assignments QuickMAP Component Bypassing QuickMAP Using the Stereo Control Using the Pad ControlInput Digital I/O Mute RX Using the Relay ControlOutput Mute Control Input Stream Emphasis Status InformationSample Rate Converter Input Stream Format Device Status Panel Output Meters Processing Components Combine Using the KnobUsing the Text Box Using the UP/DOWN Arrows Bypass Control master Fine F or Coarse C ControlPolarity Control + Mute Control M Threshold CompressorFamiliar Controls Compression Ratio Attack Time Release TimeKnee Selection Sidechain Source Unfamiliar ControlsDetection Window Crest Factor Sensitivity Computation of Average Level MeteringBypass Overshoot Meter Using the Slider Knee Control Ratio ControlSidechain Two-Way Crossovers Crossover July Three-Way Crossovers Two-way Linkwitz-Riley Crossovers Three-way Bessel and Butterworth Crossovers 7Three-way Linkwitz-Riley crossover implementation Three-way Linkwitz-Riley Crossovers July 8Four-way crossover implementation Four-Way Crossovers 9Four-way Bessel & Butterworth crossover implementation Four-way Bessel and Butterworth Crossovers 10Four-way Linkwitz-Riley crossover implementation Four-way Linkwitz-Riley Crossovers LPx HPx = θx LPx + HPx = θ July Link/Unlink Control Three-wayFour-way Low, Low-Mid, Mid, Mid-High and High Controls Class Cutoff FrequencyPassband Gain Fine F or Coarse C Control Cut Attenuation and PolarityAttenuator Processing Components Cut Setting Delay Delay Bit Level Dither Dither Bit Level Dither Signal Characteristics Filter Bands Filter HighPass Filters LowPass Filters HighShelf Filters LowShelf Filters Parametric EQ Filters Notch Filters Bandwidth Center Frequency Boost and Cut Peaked HighPass FiltersPeak Magnitude Frequency in Hz AllPass FiltersFilter Type Active Band Boost/Cut Using the Filter Tool Gain Trim Using the Magnitude Mag. or Phase ControlUsing the Logarithmic Log. or Linear Control Using the 24 dB, 40 dB, 120 dB Controls Isolate Iso Control Gain and Polarity Gain Master Attenuator Fine or Coarse ControlPre-Fader Metering PFM Processing Components Gain Opening Time Gate Closing Time Key ChannelGated Attenuation Attenuation and Threshold Controls Keying from Other Channels Open, Window, Close Controls 19Limiter component Limiter Release Time Unfamiliar Controls Metering Computation of Average Level Fine or Coarse Control Selecting the Input Select Glossary DSP Glossary This page Left Blank Intentionally Applying QuickMAPs Identification of Slots and Connectors MONDOEQ.QMS 2X6CMBC.QMS 2X8COMB.QMS 3X6CMBC.QMS 2X8THRU.QMS 4CHAN.QMS 4X6CMBC.QMS 4X6THRU.QMS 32W.QMS 2WAYS.QMS 23WAY.QMS 22WSUB.QMS 22WFR.QMS 22W2ST.QMS 42WAYS.QMS 4W2FR.QMS LCR.QMS MONO3W.QMS Copyright