New Modem Port Features

Release 3.1 of the NETServer Command Line and NETServer Manager software now support the following modem port features:

Download new firmware to the modems using NETServer Manager (windows software) version 3.2 or later.

You can now send AT commands directly to the modems from the NETServer’s command line.

Detect and flush of stopped ports

Dialback delay

Port status display shows current and configured status

Ports reset if Carrier Detect is lost before a user connects to a host

Support for of up to eight Alternate Hosts

1-4 Overview

Page 12
Image 12
USRobotics NETServer/8, NETServer/16 manual New Modem Port Features