Step 3 - Configure for dialback use?
Normally, after a user enters his or her user name and password, the connection to the host proceeds. When a dialback user enters his or her user name and password, the NETServer hangs up and dials the user back. To configure a dialback user, type the following command:
set user <name> dialback <number >
<number> can be any valid string of up to 32 characters. If you want to use AT commands in this string, begin the string with “AT”. Otherwise, the NETServer will expect only a phone number.
The two lines below actually do the same thing. The difference is that other AT commands could also be inserted in the second line.
set user smiley dialback 5551000 set user smiley dialback atdt5551000
To clear the dialback entry and return the user to normal dial in service, type the following:
set user <name> dialback none
Step 4 - Save your work
Type the following command:
save user
