Quick Command Overview
The NETServer’s configuration data is stored in several tables, including the user table and the location table among others. To change most parameters in these tables, use the set command:
set <user location port etc.> <parameter name> <value>
For example:
set net0 address 192.77.203.5
set user John password Bumblebees
Some things, like individual locations and users, must be created before they can be configured. The following command is used:
add <user location filter etc> <name>
Names are case sensitive!!! Note that anything that can be added can also be deleted.
delete <user location filter etc.> <name>
You can view current configuration information using the show command. For example:
show net0 show user John show ipxroutes
A complete listing of commands and options may be found in the back of the Quick Start Guide. Help for any of these com- mands is available using the help command. For example:
help set help set user help add help delete help show
