Configuration

A.Configure at least one port for a network dial in connection. See Configuring a Port, later in this chapter, for details.

B.Decide whether the dial in user is a normal user or a dialback user. If the he or she is a dialback user, you must create a Location Table entry for that user.

Note: Configuring the Location Table is not covered in this chapter. For detailed information on the Location table see Chapter 10. For a Location Table walkthrough, see Adding a remote device to the Location Table in Chapter 6.

C.Create an entry in the User Table for each dial-in user. See Adding a Remote User to the User Table, later in this chapter.

Network Dial In Access 5-3

Page 61
Image 61
USRobotics NETServer/16, NETServer/8 manual Configuration