Network User Parameters
Dialback
This is the location that the NETServer will dial after verifying the user’s name and password. It must be a valid location in the Location Table. Use the following command:
set user <user name> dialback <location name>
IP Address
This is the IP address that the user has for the duration of the connection. Use the following command:
set user <user name> address <assigned negotiated IP address>
Assigned You may select this option only if you have speci- fied an IP address block in the Assigned Address field of Global Configuration. The NETServer assigns the remote user a temporary IP address from this block of addresses.
Negotiated This option is valid for PPP connections only. The NETServer attempts to learn the IP address of the remote computer.
IP Address The IP address of the user’s computer must be entered.
IPX Network
To the networks on either end of a dial connection, the virtual link between the NETServer and the remote device will appear to be a physical network segment. This is a unique IPX network number assigned to that virtual network segment. It must be unique in both the NETServer’s local network and any network attached to the dial in user. Use the following command:
set user <user name> ipxnet <IPX network number>
