Save Location Table Changes
To save changes you have made, use the following command:
save location
View the Location Table
To view the Location Table, type the following command:
show table location
The information you see might look something like this:
Location | Destination | Netmask | Group | Maxconn | Type |
sasha | 199.77.203.15 | 255.255.255.0 | 1 | 2 | On Demand |
net | 192.77.206.3 | 255.255.255.0 | 1 | 5 | Manual |
|
|
|
|
|
|
View a Particular Location
To view information on a specific location, type the following command:
show location <location name>
The information that appears may look something like this:
Location: | sasha | Type: | Manual |
Destination: | 192.77.203.15 | Netmask: | 255.255.255.0 |
IPX Network: | 0AE31E03 |
|
|
Protocol: | PPP | Options: | Routing, Compression |
Group: | 1 | Max Ports: | 4 |
Idle Timeout: | 10 minutes | High Mark: | 4 bytes |
MTU: | 1500 | Async Map: | 00000000 |
Dial Script: | Send Command | Wait For Reply |
|
|
| ||
| atdt5551000 | CONNECT |
|
|
|
|
|