USRobotics NETServer/16, NETServer/8 manual Save your work and reset the ports

A modem group must be defined to tell the NETServer which modems it can use to dial out to the location. Note that since only serial port 4 was configured for dial out use, the group we create will contain only port 14.

set s4 group 1

set location sales_1 group 1

Maxports (the maximum number of ports that can be used to dial out to a location) must be set to something other than its default (0).

set location sales_1 maxports 1

For a more in-depth discussion of location table entries, please see Adding a remote device to the Location Table in Chapter 6.

Finishing the user table entry

Now that we have created the location, we can add the second line of the user table entry. It looks like this:

set user userC dialback sales_1

Save your work and reset the ports

Use the following commands:

save all reset s3 reset s4

Network Dial In Access 5-13