
Routing
Default is off. This determines whether the NETServer ex- changes routing information (RIP messages) with the dial in user. Use the following command:
set user <user name> routing <on broadcast listen off>
On | The NETServer sends RIP information to the dial in |
| user and listens for dynamic routes received from |
| the dial in user. |
Broadcast | The NETServer sends RIP information to the dial in |
| user, but does not listen for dynamic routes received |
| from the user. |
Listen | The NETServer listens for dynamic routes received |
| from the dial in user, but does not send any. |
Off | The NETServer does not exchange routing informa- |
| tion with this user. |
MTU
This is the Maximum Transmission Unit (MTU) used with this interface. Use the following command:
set user <user name> mtu <value>
IPX connections require an MTU of 1500.
PPPconnections are set between 100 and 1500 (default 1500). SLIP connections are set between 100 and 1006 (default 1006).
Compression
This enables (on) or disables (off) Van Jacobson TCP/IP header compression. Use the following command:
set user <user name> compression <on off>
Input Filter
Optional. This is a packet filter that screens all packets received from the user. See Chapter 8 for more information on packet filters. Use the following command:
set user <filter name> ifilter <filter name>