Change a User’s Parameter(s)
To change a user’s parameters, use the following command:
set user <user name> <option> <value>
Delete a User
Use the following command to delete users:
delete user <user name>
Save User Table Changes
To save changes to the user table, type the following:
save user
View the User Table
To view the User Table, type the following command:
show table user
The information you see might look something like this:
User | Type | Address/Host | Netmask/Service | RIP |
sasha | Network User | 199.55.55.55 | 255.255.255.0 | On |
net | Login User | Prompt | PortMux |
|
TECH | Network User | 199.99.55.55 | 255.255.255.0 | Off |
|
|
|
|
|
View a Particular User
To view information on a particular user, type the following command:
show user <user name>
The information displayed for a login user might look some- thing like this:
Username: | robin | Type: | Login User |
Host: | default | Login Service: | Telnet (23) |
|
|
|
|
