Chapter 3: Using Wireless Scanners with Furniture Wizard 15
3.3 Configuring Furniture Wizard for Scanner Use
You must now enable scanner use in Furniture Wizard. This section covers how to configure
the Furniture Wizard software to use captured data collected from the wireless scanners.
To do this, complete the following tasks:
1. Verify and record the IP Address of the PC on which the CIPHER Scanner Agent is being
loaded. To do this, access the Internet Protocol (TCP/IP) Properties page. Refer to the
Appendix section for more details.
2. Launch Furniture Wizard. When in the Main Menu, double-click the Furniture Wizard
logo to access the Setup & Registration function.
Figure 17: Furniture Wizard Main Menu
Double-click the “Wizard”