Chapter 7 Tutorials

7.12.2 Configure the Policy Route

Now you need to configure a policy route that has the ZyWALL use the range of public IP addresses as the source address for WAN to LAN traffic.

Click Configuration > Network > Routing > Add.

Although adding a description is optional, it is recommended. This example uses LAN-to-WAN-Range.

Specifying a Source Address is also optional although recommended. This example uses LAN_SUBNET1.

Set the Source Network Address Translation to Public-IPs and click OK.

Figure 113 Configuring the Policy Route

 

153

ZyWALL USG 50 User’s Guide