Chapter 28 Application Patrol

28.2 Application Patrol General Screen

Use this screen to enable and disable application patrol. It also lists the registration status and details about the signature set the ZyWALL is using.

Note: You must register for the IDP/AppPatrol signature service (at least the trial) before you can use it.

See Section 10.1 on page 209 for how to register.

Click Configuration > App Patrol to open the following screen.

Figure 275 Configuration > App Patrol > General

The following table describes the labels in this screen. See Section 28.3.1 on page 449 for more information as well.

Table 129 Configuration > App Patrol > General

LABEL

DESCRIPTION

Enable

Select this check box to turn on application patrol.

Application

 

Patrol

 

 

 

Enable BWM

This is a global setting for enabling or disabling bandwidth management

 

on the ZyWALL. You must enable this setting to have individual policy

 

routes or application patrol policies apply bandwidth management.

 

This same setting also appears in the Network > Routing > Policy

 

Route screen. Enabling or disabling it in one screen also enables or

 

disables it in the other screen.

 

 

 

447

ZyWALL USG 50 User’s Guide