ZyXEL Communications 91-009-073003B 36.3 Address Group Summary Screen

Chapter 36 Addresses

Table 180 Configuration > Object > Address > Address > Edit (continued)

LABEL	DESCRIPTION
Interface	If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE
	GATEWAY as the Address Type, use this field to select the interface of
	the network that this address object represents.
OK	Click OK to save your changes back to the ZyWALL.
Cancel	Click Cancel to exit this screen without saving your changes.

36.3 Address Group Summary Screen

The Address Group screen provides a summary of all address groups. To access this screen, click Configuration > Object > Address > Address Group. Click a column’s heading cell to sort the table entries by that column’s criteria. Click the heading cell again to reverse the sort order.

Figure 345 Configuration > Object > Address > Address Group

The following table describes the labels in this screen. See Section 36.3.1 on page 603 for more information as well.

Table 181 Configuration > Object > Address > Address Group

LABEL	DESCRIPTION
Add	Click this to create a new entry.
Edit	Double-click an entry or select it and click Edit to be able to modify the
	entry’s settings.
Remove	To remove an entry, select it and click Remove. The ZyWALL confirms
	you want to remove it before doing so.
Object	Select an entry and click Object References to open a screen that
References	shows which settings use the entry. See Section 11.3.2 on page 230 for
	an example.
#	This field is a sequential value, and it is not associated with a specific
	address group.
Name	This field displays the name of each address group.
Description	This field displays the description of each address group, if any.

602
	ZyWALL USG 50 User’s Guide