ZyXEL Communications 91-009-073003B 47.3 The Firmware Package Screen

Chapter 47 File Manager

Table 234 Maintenance > File Manager > Configuration File (continued)

LABEL	DESCRIPTION
File Name	This column displays the label that identifies a configuration file.
	You cannot delete the following configuration files or change their file
	names.
	The system-default.conffile contains the ZyWALL’s default settings.
	Select this file and click Apply to reset all of the ZyWALL settings to the
	factory defaults. This configuration file is included when you upload a
	firmware package.
	The startup-config.conffile is the configuration file that the ZyWALL is
	currently using. If you make and save changes during your management
	session, the changes are applied to this configuration file. The ZyWALL
	applies configuration changes made in the Web Configurator to the
	configuration file when you click Apply or OK. It applies configuration
	changes made via commands when you use the write command.
	The lastgood.conf is the most recently used (valid) configuration file
	that was saved when the device last restarted. If you upload and apply a
	configuration file with an error, you can apply lastgood.conf to return to
	a valid configuration.
Size	This column displays the size (in KB) of a configuration file.
Last Modified	This column displays the date and time that the individual configuration
	files were last changed or saved.
Upload	The bottom part of the screen allows you to upload a new or previously
Configuration	saved configuration file from your computer to your ZyWALL
File	You cannot upload a configuration file named system-default.confor
	lastgood.conf.
	If you upload startup-config.conf, it will replace the current
	configuration and immediately apply the new settings.
File Path	Type in the location of the file you want to upload in this field or click
	Browse ... to find it.
Browse...	Click Browse... to find the .conf file you want to upload. The
	configuration file must use a “.conf” filename extension. You will receive
	an error message if you try to upload a fie of a different format.
	Remember that you must decompress compressed (.zip) files before you
	can upload them.
Upload	Click Upload to begin the upload process. This process may take up to
	two minutes.

47.3 The Firmware Package Screen

Click Maintenance > File Manager > Firmware Package to open the Firmware Package screen. Use the Firmware Package screen to check your current firmware version and upload firmware to the ZyWALL.

744
	ZyWALL USG 50 User’s Guide