Chapter 5 Quick Setup

 

Table 11 WAN and ISP Connection Settings (continued)

 

LABEL

DESCRIPTION

 

Authentication

Use the drop-down list box to select an authentication protocol for

 

Type

outgoing calls. Options are:

 

 

CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when

 

 

requested by this remote node.

 

 

CHAP - Your ZyWALL accepts CHAP only.

 

 

PAP - Your ZyWALL accepts PAP only.

 

 

MSCHAP - Your ZyWALL accepts MSCHAP only.

 

 

MSCHAP-V2- Your ZyWALL accepts MSCHAP-V2 only.

 

 

 

 

User Name

Type the user name given to you by your ISP. You can use

 

 

alphanumeric and -_@$./characters, and it can be up to 31

 

 

characters long.

 

 

 

 

Password

Type the password associated with the user name above. Use up to 64

 

 

ASCII characters except the [] and ?. This field can be blank.

 

 

 

 

Retype to

Type your password again for confirmation.

 

Confirm

 

 

 

 

 

Nailed-Up

Select Nailed-Upif you do not want the connection to time out.

 

 

 

 

Idle Timeout

Type the time in seconds that elapses before the router automatically

 

 

disconnects from the PPPoE server. 0 means no timeout.

 

 

 

 

PPTP

This section only appears if the interface uses a PPPoE or PPTP

 

Configuration

Internet connection.

 

 

 

 

Base Interface

This displays the identity of the Ethernet interface you configure to

 

 

connect with a modem or router.

 

 

 

 

Base IP

Type the (static) IP address assigned to you by your ISP.

 

Address

 

 

 

 

 

IP Subnet

Type the subnet mask assigned to you by your ISP (if given).

 

Mask

 

 

 

 

 

Server IP

Type the IP address of the PPTP server.

 

 

 

 

Connection ID

Enter the connection ID or connection name in this field. It must

 

 

follow the "c:id" and "n:name" format. For example, C:12 or N:My

 

 

ISP.

 

 

This field is optional and depends on the requirements of your DSL

 

 

modem.

 

 

You can use alphanumeric and -_:characters, and it can be up to 31

 

 

characters long.

 

 

 

 

WAN Interface

 

 

Setup

 

 

 

 

 

WAN Interface

This displays the identity of the interface you configure to connect

 

 

with your ISP.

 

 

 

 

Zone

This field displays to which security zone this interface and Internet

 

 

connection will belong.

 

 

 

 

IP Address

This field is read-only when the WAN interface uses a dynamic IP

 

 

address. If your WAN interface uses a static IP address, enter it in this

 

 

field.

 

 

 

 

73

ZyWALL USG 50 User’s Guide