ZyXEL Communications 91-009-073003B 31.3.1 Base Profiles, 31.3.2 Configuring The ADP Profile Summary Screen

Chapter 31 ADP

31.3.1 Base Profiles

The ZyWALL comes with base profiles. You use base profiles to create new profiles. In the Configuration > Anti-X > ADP > Profile screen, click Add to display the following screen.

Figure 304 Base Profiles

These are the default base profiles at the time of writing.

Table 154	Base Profiles
BASE		DESCRIPTION
PROFILE
none		All traffic anomaly and protocol anomaly rules are disabled. No logs are
		generated nor actions are taken.
all		All traffic anomaly and protocol anomaly rules are enabled. Rules with a
		high or severe severity level (greater than three) generate log alerts
		and cause packets that trigger them to be dropped. Rules with a very
		low, low or medium severity level (less than or equal to three) generate
		logs (not log alerts) and no action is taken on packets that trigger them.
OK		Click OK to save your changes.
Cancel		Click Cancel to exit this screen without saving your changes.

31.3.2 Configuring The ADP Profile Summary Screen

Select Configuration > Anti-X > ADP > Profile.

Figure 305 Configuration > Anti-X > ADP > Profile

	517
ZyWALL USG 50 User’s Guide