ZyXEL Communications 91-009-073003B manual 160

Chapter 8 Dashboard

Table 19 Dashboard (continued)

LABEL	DESCRIPTION
Flash Usage	This field displays what percentage of the ZyWALL’s onboard flash
	memory is currently being used.
Active	This field displays how many traffic sessions are currently open on the
Sessions	ZyWALL. These are the sessions that are traversing the ZyWALL. Hover
	your cursor over this field to display icons. Click the Detail icon to go to
	the Session Monitor screen to see details about the active sessions.
	Click the Show Active Sessions icon to display a chart of ZyWALL’s
	recent session usage.
Interface	If an Ethernet interface does not have any physical ports associated with
Status	it, its entry is displayed in light gray text. Click the Detail icon to go to a
Summary	(more detailed) summary screen of interface statistics.
#	This shows how many interfaces there are.
Name	This field displays the name of each interface.
Status	This field displays the current status of each interface. The possible
	values depend on what type of interface it is.
	For Ethernet interfaces:
	Inactive - The Ethernet interface is disabled.
	Down - The Ethernet interface does not have any physical ports
	associated with it or the Ethernet interface is enabled but not connected.
	Speed / Duplex - The Ethernet interface is enabled and connected.
	This field displays the port speed and duplex setting (Full or Half).
	For cellular (3G) interfaces, see Section 9.9 on page 183 for the status
	that can appear.
Zone	This field displays the zone to which the interface is currently assigned.
IP Address	This field displays the current IP address assigned to the interface. If the
	IP address is 0.0.0.0, the interface is disabled or did not receive an IP
	address and subnet mask via DHCP.
	If this interface is a member of an active virtual router, this field displays
	the IP address it is currently using. This is either the static IP address of
	the interface (if it is the master) or the management IP address (if it is a
	backup).
Action	Use this field to get or to update the IP address for the interface.
	Click Renew to send a new DHCP request to a DHCP server.
	Click the Connect icon to have the ZyWALL try to connect a PPPoE/PPTP
	interface. If the interface cannot use one of these ways to get or to
	update its IP address, this field displays n/a.
	Click the Disconnect icon to stop a PPPoE/PPTP connection.
Extension Slot	This section of the screen displays the status of the extension card slot
	and the USB ports.
Slot	This field displays the name of each extension slot.
Device	This field displays the name of the device connected to the extension slot
	(or none if no device is detected).

160
	ZyWALL USG 50 User’s Guide