Chapter 9 Monitor

Table 35 Monitor > System Status > Cellular Status (continued)

LABEL

DESCRIPTION

Connected

This field displays the model name of the cellular card.

Device

 

 

 

Status

No device - no 3G device is connected to the ZyWALL.

 

No Service - no 3G network is available in the area; you cannot

 

connect to the Internet.

 

Limited Service - returned by the service provider in cases where the

 

SIM card is expired, the user failed to pay for the service and so on;

 

you cannot connect to the Internet.

 

Device detected - displays when you connect a 3G device.

 

Device error - a 3G device is connected but there is an error.

 

Probe device fail - the ZyWALL’s test of the 3G device failed.

 

Probe device ok - the ZyWALL’s test of the 3G device succeeded.

 

Init device fail - the ZyWALL was not able to initialize the 3G device.

 

Init device ok - the ZyWALL initialized the 3G card.

 

Check lock fail - the ZyWALL’s check of whether or not the 3G device

 

is locked failed.

 

Device locked - the 3G device is locked.

 

SIM error - there is a SIM card error on the 3G device.

 

SIM locked-PUK- the PUK is locked on the 3G device’s SIM card.

 

SIM locked-PIN- the PIN is locked on the 3G device’s SIM card.

 

Unlock PUK fail - Your attempt to unlock a WCDMA 3G device’s PUK

 

failed because you entered an incorrect PUK.

 

Unlock PIN fail - Your attempt to unlock a WCDMA 3G device’s PIN

 

failed because you entered an incorrect PIN.

 

Unlock device fail - Your attempt to unlock a CDMA2000 3G device

 

failed because you entered an incorrect device code.

 

Device unlocked - You entered the correct device code and unlocked

 

a CDMA2000 3G device.

 

Get dev-info fail - The ZyWALL cannot get cellular device information.

 

Get dev-info ok - The ZyWALL succeeded in retrieving 3G device

 

information.

 

Searching network - The 3G device is searching for a network.

 

Get signal fail - The 3G device cannot get a signal from a network.

 

Network found - The 3G device found a network.

 

Apply config - The ZyWALL is applying your configuration to the 3G

 

device.

 

Inactive - The 3G interface is disabled.

 

Active - The 3G interface is enabled.

 

Incorrect device - The connected 3G device is not compatible with

 

the ZyWALL.

 

Correct device - The ZyWALL detected a compatible 3G device.

 

Set band fail - Applying your band selection was not successful.

 

Set band ok - The ZyWALL successfully applied your band selection.

 

Set profile fail - Applying your ISP settings was not successful.

 

Set profile ok - The ZyWALL successfully applied your ISP settings.

 

PPP fail - The ZyWALL failed to create a PPP connection for the cellular

 

interface.

 

Need auth-password- You need to enter the password for the 3G

 

card in the cellular edit screen.

 

Device ready - The ZyWALL successfully applied all of your

 

configuration and you can use the 3G connection.

 

 

184

 

ZyWALL USG 50 User’s Guide