Chapter 6 Configuration Basics

4SNAT is also now performed by default and included in the NAT table.

6.5Feature Configuration Overview

This section provides information about configuring the main features in the ZyWALL. The features are listed in the same sequence as the menu item(s) in the Web Configurator. Each feature description is organized as shown below.

6.5.1 Feature

This provides a brief description. See the appropriate chapter(s) in this User’s Guide for more information about any feature.

 

This shows you the sequence of menu items and tabs you should click

MENU ITEM(S)

to find the main screen(s) for this feature. See the web help or the

 

related User’s Guide chapter for information about each screen.

 

These are other features you should configure before you configure

 

the main screen(s) for this feature.

 

If you did not configure one of the prerequisites first, you can often

PREREQUISITES

select an option to create a new object. After you create the object

you return to the main screen to finish configuring the feature.

 

You may not have to configure everything in the list of prerequisites.

 

For example, you do not have to create a schedule for a policy route

 

unless time is one of the criterion.

 

 

 

There are two uses for this.

 

These are other features you should usually configure or check right

 

after you configure the main screen(s) for this feature. For example,

WHERE USED

you should usually create a policy route for a VPN tunnel.

You have to delete the references to this feature before you can delete

 

 

any settings. For example, you have to delete (or modify) all the

 

policy routes that refer to a VPN tunnel before you can delete the VPN

 

tunnel.

 

 

Example: This provides a simple example to show you how to configure this feature. The example is usually based on the network topology in Figure 14 on page 90.

Note: PREQUISITES or WHERE USED does not appear if there are no prerequisites or references in other features to this one. For example, no other features reference DDNS entries, so there is no WHERE USED entry.

 

95

ZyWALL USG 50 User’s Guide