Chapter 11 Interfaces

11.4.1 PPP Interface Summary

This screen lists every PPPoE/PPTP interface. To access this screen, click Configuration > Network > Interface > PPP.

Configuration > Network > Interface > PPP

Each field is described in the table

 

 

 

below.

Table 57 Configuration > Network > Interface > PPP

LABEL

DESCRIPTION

User

The ZyWALL comes with the (non-removable) System Default PPP

Configuration /

interfaces pre-configured. You can create (and delete) User

System Default

Configuration PPP interfaces.

 

 

Add

Click this to create a new user-configured PPP interface.

 

 

Edit

Double-click an entry or select it and click Edit to open a screen

 

where you can modify the entry’s settings.

 

 

Remove

To remove a user-configured PPP interface, select it and click

 

Remove. The ZyWALL confirms you want to remove it before doing

 

so.

 

 

Activate

To turn on an entry, select it and click Activate.

 

 

Inactivate

To turn off an entry, select it and click Inactivate.

 

 

Connect

To connect an interface, select it and click Connect. You might use

 

this in testing the interface or to manually establish the connection for

 

a Dial-on-DemandPPPoE/PPTP interface.

 

 

Disconnect

To disconnect an interface, select it and click Disconnect. You might

 

use this in testing the interface.

 

 

Object References

Select an entry and click Object References to open a screen that

 

shows which settings use the entry. See Section 11.3.2 on page 230

 

for an example.

 

 

#

This field is a sequential value, and it is not associated with any

 

interface.

 

 

232

 

ZyWALL USG 50 User’s Guide