Chapter 45 System

settings, including from which zones SNMP can be used to access the ZyWALL. You can also specify from which IP addresses the access can come.

Figure 421 Configuration > System > SNMP

The following table describes the labels in this screen.

Table 225 Configuration > System > SNMP

LABEL

DESCRIPTION

Enable

Select the check box to allow or disallow the computer with the IP

 

address that matches the IP address(es) in the Service Control table to

 

access the ZyWALL using this service.

 

 

Server Port

You may change the server port number for a service if needed, however

 

you must use the same port number in order to use that service for

 

remote management.

 

 

Get

Enter the Get Community, which is the password for the incoming Get

Community

and GetNext requests from the management station. The default is

 

public and allows all requests.

 

 

Set

Enter the Set community, which is the password for incoming Set

Community

requests from the management station. The default is private and allows

 

all requests.

 

 

Trap

 

 

 

Community

Type the trap community, which is the password sent with each trap to

 

the SNMP manager. The default is public and allows all requests.

 

 

Destination

Type the IP address of the station to send your SNMP traps to.

 

 

Service

This specifies from which computers you can access which ZyWALL

Control

zones.

 

 

718

 

ZyWALL USG 50 User’s Guide