Appendix A Log Descriptions

Table 274 Interface Logs (continued)

LOG MESSAGE

DESCRIPTION

Interface %s is

A PPP interface disconnected successfully. %s: interface

disconnected.

name.

Interface %s connect

The interface’s connection will be terminated because the

failed: Peer not

server did not send any LCP packets. %s: interface name.

responding.

 

Interface %s connect

PAP authentication failed (the server must support PAP and

failed: PAP

verify verify that the authentication failed, this does not

authentication

include cases where the server does not support PAP). %s:

failed.

PPP interface name.

Interface %s connect

A PPPOE connection timed out due to a lack of response from

failed: Connect

the PPPOE server. %s: PPP interface name.

timeout.

 

Interface %s create

A bridge interface has no member. %s: bridge interface

failed because has no

name.

member.

 

"Interface cellular

The listed error code (%d) was generated due to an internal

Application Error Code

cellular interface error.

%d\n.

 

"An error [%d]

The listed error code (%d) happened when the ZyWALL

occurred while

attempted to negotiate with the cellular device installed in (or

negotiating with the

connected to) the listed slot (%s). Remove and reinstall the

device in %s. Please

device.

try to remove then

 

insert the device.

 

"Unable to negotiate

The ZyWALL could not negotiate with the cellular device

with the device in %s.

installed in (or connected to) the listed slot (%s). Remove

Please try to remove

and reinstall the device.

then insert the

 

device.

 

"Unable to configure

The ZyWALL failed to set the cellular device installed in (or

the selected frequency

connected to) the listed slot (%s) to use the frequency band

band to the device in

you configured. The cellular device may not support the band

%s. Please try to

or you may need to try removing and reinstalling the device.

remove then insert the

 

device.

 

"PIN code is required

The PIN code configured for the listed cellular interface (%d)

for inteface

is incorrect or missing.

cellular%d. Please

 

check the PIN code

 

setting.

 

"SIM card has been

You entered the correct PUK code and unlocked the SIM card

successfully unlocked

for the cellular device associated with the listed cellular

by PUK code on

interface (%d).

interface cellular%d.

 

"Incorrect PUK code of

You entered an incorrect PUK code so you were not able to

interface cellular%d.

unlock the SIM card for the cellular device associated with the

Please check the PUK

listed cellular interface (%d).

code setting.

 

832

 

ZyWALL USG 50 User’s Guide