Appendix A Log Descriptions

 

Table 262 IKE Logs (continued)

 

LOG MESSAGE

DESCRIPTION

 

 

VPN gateway %s was

%s is the gateway name. An administrator enabled the VPN

 

 

enabled

gateway.

 

 

XAUTH fail! My name:

%s is the my xauth name. This indicates that my name is

 

 

%s

invalid.

 

 

XAUTH fail! Remote

%s is the remote xauth name. This indicates that a remote

 

 

user: %s

user’s name is invalid.

 

 

XAUTH succeed! My

%s is the my xauth name. This indicates that my name is

 

 

name: %s

valid.

 

 

XAUTH succeed! Remote

%s is the remote xauth name. This indicate that a remote

 

 

user: %s

user’s name is valid

 

 

Dynamic Tunnel

The variables represent the phase 1 name, tunnel name, SPI

 

 

[%s:%s:0x%x:%s] built

and the xauth name (optional). The phase-2 tunnel

 

 

successfully

negotiation is complete.

 

 

Dynamic Tunnel

The variables represent the phase 1 name, tunnel name, old

 

 

[%s:%s:0x%x:0x%x:%s]

SPI, new SPI and the xauth name (optional). The tunnel was

 

 

rekeyed successfully

rekeyed successfully.

 

 

Tunnel

The variables represent the phase 1 name, tunnel name, SPI

 

 

[%s:%s:0x%x:%s] built

and the xauth name (optional). The phase-2 tunnel

 

 

successfully

negotiation is complete.

 

 

Tunnel

The variables represent the phase 1 name, tunnel name, old

 

 

[%s:%s:0x%x:0x%x:%s]

SPI, new SPI and the xauth name (optional). The tunnel was

 

 

rekeyed successfully

rekeyed successfully.

 

 

Tunnel [%s:%s] Phase

The variables represent the phase 1 name and tunnel name.

 

 

1 pre-shared key

When negotiating phase-1, the pre-shared keys did not

 

 

mismatch

match.

 

 

Tunnel [%s:%s]

The variables represent the phase 1 name and tunnel name.

 

 

Recving IKE request

The device received an IKE request.

 

 

Tunnel [%s:%s]

The variables represent the phase 1 name and tunnel name.

 

 

Sending IKE request

The device sent an IKE request.

 

 

Tunnel [%s:0x%x] is

The variables represent the tunnel name and the SPI of a

 

 

disconnected

tunnel that was disconnected.

 

 

Tunnel [%s] rekeyed

%s is the tunnel name. The tunnel was rekeyed successfully.

 

 

successfully

 

 

 

Table 263 IPSec Logs

 

 

 

LOG MESSAGE

DESCRIPTION

 

 

Corrupt packet,

The device received corrupt IPsec packets and could not

 

 

Inbound transform

process them.

 

 

operation fail

 

 

 

Encapsulated packet

An outgoing packet needed to be transformed but was longer

 

 

too big with length

than 65535.

 

 

Get inbound transform

When performing inbound processing for incoming IPSEC

 

 

fail

packets and ICMPs related to them, the engine cannot obtain

 

 

 

the transform context.

 

 

 

 

 

 

811

ZyWALL USG 50 User’s Guide