ZyXEL Communications 91-009-073003B manual 814

Appendix A Log Descriptions

Table 266 Policy Route Logs (continued)

LOG MESSAGE	DESCRIPTION
The policy route %d	Use an empty object group.
uses empty user group!	%d: the policy route rule number
The policy route %d	Use an empty object group.
uses empty source	%d: the policy route rule number
address group!
The policy route %d	Use an empty object group.
uses empty destination	%d: the policy route rule number
address group!
The policy route %d	Use an empty object group.
uses empty service	%d: the policy route rule number
group
Policy-route rule %d	Rules is inserted into system.
was inserted.	%d: the policy route rule number
Policy-route rule %d	Rules is appended into system.
was appended.	%d: the policy route rule number
Policy-route rule %d	Rule is modified.
was modified.	%d: the policy route rule number
Policy-route rule %d	Rule is moved.
was moved to %d.	1st %d: the original policy route rule number
	2nd %d: the new policy route rule number
Policy-route rule %d	Rule is deleted.
was deleted.	%d: the policy route rule number
Policy-route rules	Policy routing rules are cleared.
were flushed.
BWM has been	The global setting for bandwidth management on the ZyWALL
activated.	has been turned on.
BWM has been	The global setting for bandwidth management on the ZyWALL
deactivated.	has been turned off.
Interface %s alive,	An interface came back up so the ZyWALL will use the related
related policy route	policy route rules again.
rules will be re-
enabled
Interface %s dead,	An interface went down so the ZyWALL will stop using the
related policy route	related policy route rules.
rules will be disabled
Trunk %s alive,	A trunk came back up so the ZyWALL will use the related
related policy route	policy route rules again.
rules will be re-
enabled
Trunk %s dead, related	A trunk went down so the ZyWALL will stop using the related
policy route rules	policy route rules.
will be disabled

814
	ZyWALL USG 50 User’s Guide