Chapter 46 Log and Report

The following table describes the labels in this screen.

Table 230 Configuration > Log & Report > Log Setting > Edit (System Log)

LABEL

DESCRIPTION

E-Mail Server 1/2

 

 

 

Active

Select this to send log messages and alerts according to the

 

information in this section. You specify what kinds of log messages

 

are included in log information and what kinds of log messages are

 

included in alerts in the Active Log and Alert section.

 

 

Mail Server

Type the name or IP address of the outgoing SMTP server.

 

 

Mail Subject

Type the subject line for the outgoing e-mail.

 

 

Send From

Type the e-mail address from which the outgoing e-mail is

 

delivered. This address is used in replies.

 

 

Send Log To

Type the e-mail address to which the outgoing e-mail is delivered.

 

 

Send Alerts To

Type the e-mail address to which alerts are delivered.

 

 

Sending Log

Select how often log information is e-mailed. Choices are: When

 

Full, Hourly and When Full, Daily and When Full, and Weekly

 

and When Full.

 

 

Day for Sending

This field is available if the log is e-mailed weekly. Select the day of

Log

the week the log is e-mailed.

 

 

Time for Sending

This field is available if the log is e-mailed weekly or daily. Select

Log

the time of day (hours and minutes) when the log is e-mailed. Use

 

24-hour notation.

 

 

SMTP

Select this check box if it is necessary to provide a user name and

Authentication

password to the SMTP server.

 

 

User Name

This box is effective when you select the SMTP Authentication

 

check box. Type the user name to provide to the SMTP server when

 

the log is e-mailed.

 

 

Password

This box is effective when you select the SMTP Authentication

 

check box. Type the password to provide to the SMTP server when

 

the log is e-mailed.

 

 

Active Log and Alert

 

 

 

System log

Use the System Log drop-down list to change the log settings for

 

all of the log categories.

 

disable all logs (red X) - do not log any information for any

 

category for the system log or e-mail any logs to e-mail server 1 or

 

2.

 

enable normal logs (green check mark) - create log messages

 

and alerts for all categories for the system log. If e-mail server 1 or

 

2 also has normal logs enabled, the ZyWALL will e-mail logs to

 

them.

 

enable normal logs and debug logs (yellow check mark) -

 

create log messages, alerts, and debugging information for all

 

categories. The ZyWALL does not e-mail debugging information,

 

even if this setting is selected.

 

 

 

729

ZyWALL USG 50 User’s Guide