ZyXEL Communications 91-009-073003B 34.3.1 The Anti-SpamPolicy Add or Edit Screen

Chapter 34 Anti-Spam

Table 164 Configuration > Anti-X > Anti-Spam > General

LABEL	DESCRIPTION
Remove	Select an entry and click this to delete it.
Activate	To turn on an entry, select it and click Activate.
Inactivate	To turn off an entry, select it and click Inactivate.
Move	To change an entry’s position in the numbered list, select it and click
	Move to display a field to type a number for where you want to put that
	entry and press [ENTER] to move the entry to the number that you
	typed.
Status	The activate (light bulb) icon is lit when the entry is active and dimmed
	when the entry is inactive.
Priority	This is the position of an anti-spam policy in the list. The ordering of your
	anti-spam policies is important as the ZyWALL applies them in sequence.
	Once traffic matches an anti-spam policy, the ZyWALL applies that policy
	and does not check the traffic against any more policies.
From	The anti-spam policy has the ZyWALL scan e-mail traffic that is coming
	from this zone and going to the To zone.
To	The anti-spam policy has the ZyWALL scan e-mail traffic that is going to
	this zone from the From zone.
Protocol	These are the protocols of traffic to scan for spam. SMTP applies to
	traffic using TCP port 25. POP3 applies to traffic using TCP port 110.
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to return the screen to its last-saved settings.

34.3.1 The Anti-Spam Policy Add or Edit Screen

Click the Add or Edit icon in the Configuration > Anti-X > Anti-Spam > General screen to display the configuration screen as shown next. Use this screen to configure an anti-spam policy that controls what traffic direction of e-mail to

	569
ZyWALL USG 50 User’s Guide