Chapter 36 Addresses

•RANGE - a range address is defined by a Starting IP Address and an Ending IP Address.

•SUBNET - a network address is defined by a Network IP address and Netmask subnet mask.

The Address screen provides a summary of all addresses in the ZyWALL. To access this screen, click Configuration > Object > Address > Address. Click a column’s heading cell to sort the table entries by that column’s criteria. Click the heading cell again to reverse the sort order.

Figure 343 Configuration > Object > Address > Address

The following table describes the labels in this screen. See Section 36.2.1 on page 601 for more information as well.

Table 179 Configuration > Object > Address > Address

LABEL

DESCRIPTION

Add

Click this to create a new entry.

 

 

Edit

Double-click an entry or select it and click Edit to be able to modify the

 

entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms

 

you want to remove it before doing so.

 

 

Object

Select an entry and click Object References to open a screen that

References

shows which settings use the entry. See Section 11.3.2 on page 230 for

 

an example.

 

 

#

This field is a sequential value, and it is not associated with a specific

 

address.

 

 

Name

This field displays the configured name of each address object.

 

 

Type

This field displays the type of each address object. “INTERFACE” means

 

the object uses the settings of one of the ZyWALL’s interfaces.

 

 

Address

This field displays the IP addresses represented by each address object.

 

If the object’s settings are based on one of the ZyWALL’s interfaces, the

 

name of the interface displays first followed by the object’s current

 

address settings.

 

 

600

 

ZyWALL USG 50 User’s Guide