Chapter 18 HTTP Redirect

•a application patrol rule to allow HTTP traffic between dmz and wan1.

•a policy route to forward HTTP traffic from proxy server A to the Internet.

Finding Out More

See Section 6.5.11 on page 99 for related information on these screens.

18.2 The HTTP Redirect Screen

To configure redirection of a HTTP request to a proxy server, click Configuration

>Network > HTTP Redirect. This screen displays the summary of the HTTP redirect rules.

Note: You can configure up to one HTTP redirect rule for each (incoming) interface.

Figure 198 Configuration > Network > HTTP Redirect

The following table describes the labels in this screen.

Table 94 Configuration > Network > HTTP Redirect

LABEL

DESCRIPTION

Add

Click this to create a new entry.

 

 

Edit

Double-click an entry or select it and click Edit to open a screen where

 

you can modify the entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms

 

you want to remove it before doing so.

 

 

Activate

To turn on an entry, select it and click Activate.

 

 

Inactivate

To turn off an entry, select it and click Inactivate.

 

 

#

This field is a sequential value, and it is not associated with a specific

 

entry.

 

 

Status

This icon is lit when the entry is active and dimmed when the entry is

 

inactive.

 

 

Name

This is the descriptive name of a rule.

 

 

Interface

This is the interface on which the request must be received.

 

 

Proxy Server

This is the IP address of the proxy server.

 

 

 

333

ZyWALL USG 50 User’s Guide