ZyXEL Communications 91-009-073003B 3.3.4 Tables and Lists, 3.3.3.4 CLI Messages

Chapter 3 Web Configurator

The fields vary with the type of object. The following table describes labels that can appear in this screen.

Table 9 Object References

LABEL	DESCRIPTION
Object Name	This identifies the object for which the configuration settings that use it
	are displayed. Click the object’s name to display the object’s
	configuration screen in the main window.
#	This field is a sequential value, and it is not associated with any entry.
Service	This is the type of setting that references the selected object. Click a
	service’s name to display the service’s configuration screen in the main
	window.
Priority	If it is applicable, this field lists the referencing configuration item’s
	position in its list, otherwise N/A displays.
Name	This field identifies the configuration item that references the object.
Description	If the referencing configuration item has a description configured, it
	displays here.
Refresh	Click this to update the information in this screen.
Cancel	Click Cancel to close the screen.

3.3.3.4 CLI Messages

Click CLI to look at the CLI commands sent by the Web Configurator. These commands appear in a popup window, such as the following.

Figure 18 CLI Messages

Click Clear to remove the currently displayed information.

See the Command Reference Guide for information about the commands.

3.3.4 Tables and Lists

The Web Configurator tables and lists are quite flexible and provide several options for how to display their entries.

54
	ZyWALL USG 50 User’s Guide