Chapter 45 System

Table 221 Configuration > System > SSH (continued)

LABEL

DESCRIPTION

Move

To change an entry’s position in the numbered list, select the method

 

and click Move to display a field to type a number for where you want to

 

put it and press [ENTER] to move the rule to the number that you typed.

 

 

#

This the index number of the service control rule.

 

 

Zone

This is the zone on the ZyWALL the user is allowed or denied to access.

 

 

Address

This is the object name of the IP address(es) with which the computer is

 

allowed or denied to access.

 

 

Action

This displays whether the computer with the IP address specified above

 

can access the ZyWALL zone(s) configured in the Zone field (Accept) or

 

not (Deny).

 

 

Apply

Click Apply to save your changes back to the ZyWALL.

 

 

Reset

Click Reset to return the screen to its last-saved settings.

 

 

45.7.5 Secure Telnet Using SSH Examples

This section shows two examples using a command interface and a graphical interface SSH client program to remotely access the ZyWALL. The configuration and connection steps are similar for most SSH client programs. Refer to your SSH client program user’s guide.

45.7.5.1 Example 1: Microsoft Windows

This section describes how to access the ZyWALL using the Secure Shell Client program.

1Launch the SSH client and specify the connection information (IP address, port number) for the ZyWALL.

2Configure the SSH client to accept connection using SSH version 1.

3A window displays prompting you to store the host key in you computer. Click Yes to continue.

Figure 415 SSH Example 1: Store Host Key

710

 

ZyWALL USG 50 User’s Guide