Chapter 45 System

Table 218 Configuration > System > WWW > Service Control (continued)

LABEL

DESCRIPTION

HTTP

 

 

 

Enable

Select the check box to allow or disallow the computer with the IP

 

address that matches the IP address(es) in the Service Control

 

table to access the ZyWALL Web Configurator using HTTP

 

connections.

 

 

Server Port

You may change the server port number for a service if needed,

 

however you must use the same port number in order to use that

 

service to access the ZyWALL.

 

 

Admin/User

Admin Service Control specifies from which zones an administrator

Service Control

can use HTTP to manage the ZyWALL (using the Web Configurator).

 

You can also specify the IP addresses from which the administrators

 

can manage the ZyWALL.

 

User Service Control specifies from which zones a user can use

 

HTTP to log into the ZyWALL (to log into SSL VPN for example). You

 

can also specify the IP addresses from which the users can access

 

the ZyWALL.

 

 

Add

Click this to create a new entry. Select an entry and click Add to

 

create a new entry after the selected entry.

 

 

Edit

Double-click an entry or select it and click Edit to be able to modify

 

the entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The ZyWALL

 

confirms you want to remove it before doing so. Note that

 

subsequent entries move up by one when you take this action.

 

 

Move

To change an entry’s position in the numbered list, select the method

 

and click Move to display a field to type a number for where you

 

want to put it and press [ENTER] to move the rule to the number

 

that you typed.

 

 

#

This is the index number of the service control rule.

 

The entry with a hyphen (-) instead of a number is the ZyWALL’s

 

(non-configurable) default policy. The ZyWALL applies this to traffic

 

that does not match any other configured rule. It is not an editable

 

rule. To apply other behavior, configure a rule that traffic will match

 

so the ZyWALL will not have to use the default policy.

 

 

Zone

This is the zone on the ZyWALL the user is allowed or denied to

 

access.

 

 

Address

This is the object name of the IP address(es) with which the

 

computer is allowed or denied to access.

 

 

Action

This displays whether the computer with the IP address specified

 

above can access the ZyWALL zone(s) configured in the Zone field

 

(Accept) or not (Deny).

 

 

Authentication

 

 

 

Client

Select a method the HTTPS or HTTP server uses to authenticate a

Authentication

client.

Method

You must have configured the authentication methods in the Auth.

 

 

method screen.

 

 

694

 

ZyWALL USG 50 User’s Guide