Chapter 24 SSL VPN

on your network for full tunnel mode access, enter access messages or upload a custom logo to be displayed on the remote user screen.

Figure 243 VPN > SSL VPN > Global Setting

The following table describes the labels in this screen.

Table 122 VPN > SSL VPN > Global Setting

LABEL

DESCRIPTION

Global Setting

 

 

 

Network

Specify the IP address of the ZyWALL (or a gateway device) for full

Extension Local

tunnel mode SSL VPN access.

IP

Leave this field to the default settings unless it conflicts with another

 

 

interface.

 

 

SSL VPN Login

 

Domain Name

 

 

 

SSL VPN Login

Specify a domain name for users to use for SSL VPN login. The domain

Domain Name

name must be registered to one of the ZyWALL’s IP addresses or be one

1/2

of the ZyWALL’s DDNS entries. You can specify up to two domain names

 

so you could use one domain name for each of two WAN ports. Do not

 

include the host. For example, www.zyxel.com is a fully qualified

 

domain name where “www” is the host; so you would just use

 

“zyxel.com”.

 

The ZyWALL displays the normal login screen without the button for

 

logging into the Web Configurator.

 

 

Message

 

 

 

Login Message

Specify a message to display on the screen when a user logs in and an

 

SSL VPN connection is established successfully. You can enter up to 60

 

characters (“a-z”, A-Z”, “0-9”) with spaces allowed.

 

 

 

417

ZyWALL USG 50 User’s Guide